+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-HA /HA v2 (https://www.kincony.com/forum/forumdisplay.php?fid=55)
+--- Thread: KC868 HA V2 and KCS v2 (/showthread.php?tid=5843)
KC868 HA V2 and KCS v2 - whitehawk1979 - 06-03-2024
Hi
Can you make a tutorial video for KC868 HA V2 and KCS v2 settings please ?
RE: KC868 HA V2 and KCS v2 - admin - 06-03-2024
which relay board model you are using?
RE: KC868 HA V2 and KCS v2 - whitehawk1979 - 06-03-2024
H32B , Kc868-A2, KC868-A8, KC868-AP, KC868-COLB and KC868-AK ( connected to H32B with modbus, and the KCS v2 firmware on all board ( minus the H32B and Colb ) an A32 pro is on the way
RE: KC868 HA V2 and KCS v2 - admin - 06-03-2024
KC868-A series relay board if have RS485 port , support use HA board.
COLB, H32B, AP: not support HA board.
RE: KC868 HA V2 and KCS v2 - whitehawk1979 - 06-03-2024
(06-03-2024, 08:42 AM)admin Wrote: KC868-A series relay board if have RS485 port , support use HA board.
COLB, H32B, AP: not support HA board.
sorry, i have an h32b pro, and you have a tutorial for H32B Pro working with KC868-HA https://www.youtube.com/watch?v=ViwhDKB6xBk&t=209s, and in the kcs v2 at the modbus section is a setting for Modbus-rtu and modbus-ha for kc868-ap
where can i set the modbus address for the H32B Pro...?
RE: KC868 HA V2 and KCS v2 - admin - 06-03-2024
where can i set the modbus address for the H32B Pro...? open H32B Pro ethernet webpage, there is RS485 setting options, set the RS485 address.