Problem with KC868-A16 Firmware - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40) +--- Thread: Problem with KC868-A16 Firmware (/showthread.php?tid=6448)

Problem with KC868-A16 Firmware - Arek - 08-19-2024 Hi, I have a problem with KC868-A16 board. I can't log in to the board. Firmware installation performed in accordance with the guide returns information as shown in the attached screenshots. The LAN port LEDs do not light up. I can't log in to the board. what could be the cause? where to start? Screenshot_1 Screenshot_2 Screenshot_3 RE: Problem with KC868-A16 Firmware - admin - 08-19-2024 all are wrong. you just download one firmware BIN file at address 0x0 download firmware BIN file from here: https://www.kincony.com/forum/showthread.php?tid=3791 RE: Problem with KC868-A16 Firmware - wojsst - 08-31-2024 Hello, I try to make flash because, i couldn't load my project in Arduino IDE and I get that kind of fault: I try also with other ports and other cables.     RE: Problem with KC868-A16 Firmware - admin - 08-31-2024 when download firmware, make sure you have removed RF 433M receiver.