+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A6 (https://www.kincony.com/forum/forumdisplay.php?fid=22)
+--- Thread: PSRAM Needed. Replace ESP32? (/showthread.php?tid=6471)
PSRAM Needed. Replace ESP32? - mikesloper - 08-24-2024
The memory on the ESP32-WROOM-32E is not enough for my application.
Can I replace it with ESP32-WROOM-32E-N16R2 or ESP32-WROOM-32E-N8R2?
I believe GPIO 16 and 17 (rs232) are a problem. I would like to keep rs232 if possible. If not possible also OK.
Also, are there plans for a new version for the A6 board with ESP32-S3 with PSRAM?
RE: PSRAM Needed. Replace ESP32? - admin - 08-24-2024
if you don't use GPIO16, then you can replace with ESP32-WROOM-32E-N16R2 or ESP32-WROOM-32E-N8R2. Because of PSRAM need use by GPIO16.
we already have the development plan, this year will design new relay controller series by ESP32-S3 N16R8 version.