![]() |
KC868 A32 Firmware 2.2.4 binding - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-A32/A32 Pro (https://www.kincony.com/forum/forumdisplay.php?fid=27) +--- Thread: KC868 A32 Firmware 2.2.4 binding (/showthread.php?tid=6706) |
KC868 A32 Firmware 2.2.4 binding - iozzi_giorgio - 09-16-2024 good morning I tried to load the KCS 2.2.4 firmware on the KC868_A32 rev. 1.4 board. in programming I can't connect the input to the output (bind). in the input screen I only see "reverse". I also tried to load a previous version of KCS. I saw the video on YouTube but I couldn't solve it. I also tried with different browsers. can you help me? RE: KC868 A32 Firmware 2.2.4 binding - admin - 09-16-2024 KCS v2 use IFTTT set INPUT trigger OUTPUT. here is online guide of KCS v2: https://www.kincony.com/esp32-kcsv2-firmware.html RE: KC868 A32 Firmware 2.2.4 binding - iozzi_giorgio - 09-20-2024 Thank you. Problem solved with KCS. now I'm trying to integrate home assistant via mqtt. Is it possible to have the updated configuration imported into the yaml file? or if an updated guide already exists. Thank you |