+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: NodeRed MQTT and Single output State (/showthread.php?tid=6828)
NodeRed MQTT and Single output State - charlesrg - 10-02-2024
I've a few KC868_A32M and A16
I'm trying to subscribe to the state of a single output instead of the whole board.
On NodeREd I wanted to subscribe to a topiic like:
KC868_A32M/E05A1B5BE4C8/STATE/output1
So only changes to output1 would trigger an action. Is it possible or is this something for a future firmware update ?
RE: NodeRed MQTT and Single output State - admin - 10-03-2024
here showed KCS v2 mqtt document: https://www.kincony.com/forum/attachment.php?aid=2872
if you are using KC868-A32M, the command topic should be: KC868_A32M/XXXXXXXXXXXX/SET
XXXXXXXXXXXX replace with your A32M's serial number.