+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KinCony AS (https://www.kincony.com/forum/forumdisplay.php?fid=64)
+--- Thread: AS ESPHome yaml for home assistant (/showthread.php?tid=6890)
AS ESPHome yaml for home assistant - admin - 10-19-2024
Code:
esphome:
name: as
friendly_name: AS
platformio_options:
board_build.flash_mode: dio
on_boot:
- light.turn_on:
id: led_ww
blue: 100%
brightness: 60%
effect: fast pulse
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
sdkconfig_options:
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
CONFIG_AUDIO_BOARD_CUSTOM: "y"
psram:
mode: octal # quad for N8R2 and octal for N16R8
speed: 80MHz
# Enable logging
logger:
hardware_uart: USB_SERIAL_JTAG
# Enable Home Assistant API
api:
encryption:
key: "TFpb+pBAvQIS1MVwaA7EoJ2DkpWE+79UvVro7yMyGdU="
on_client_connected:
then:
- delay: 50ms
- light.turn_off: led_ww
- micro_wake_word.start:
on_client_disconnected:
then:
- voice_assistant.stop:
ota:
- platform: esphome
password: "1245211a05eef56614a2ef5a3f3e971c"
wifi:
ssid: "KinCony"
password: "a12345678"
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Esp32-S3-Wake-Word"
password: "LJfUrdJk3svP"
captive_portal:
button:
- platform: restart
name: "Restart"
id: but_rest
switch:
- platform: template
id: mute
name: mute
optimistic: true
on_turn_on:
- micro_wake_word.stop:
- voice_assistant.stop:
- light.turn_on:
id: led_ww
red: 100%
green: 0%
blue: 0%
brightness: 60%
effect: fast pulse
- delay: 2s
- light.turn_off:
id: led_ww
- light.turn_on:
id: led_ww
red: 100%
green: 0%
blue: 0%
brightness: 30%
on_turn_off:
- micro_wake_word.start:
- light.turn_on:
id: led_ww
red: 0%
green: 100%
blue: 0%
brightness: 60%
effect: fast pulse
- delay: 2s
- light.turn_off:
id: led_ww
light:
- platform: esp32_rmt_led_strip
id: led_ww
rgb_order: GRB
pin: GPIO16
num_leds: 1
rmt_channel: 0
chipset: ws2812
name: "on board light"
effects:
- pulse:
- pulse:
name: "Fast Pulse"
transition_length: 0.5s
update_interval: 0.5s
min_brightness: 0%
max_brightness: 100%
# Audio and Voice Assistant Config
i2s_audio:
- id: i2s_in
i2s_lrclk_pin: GPIO3 #WS
i2s_bclk_pin: GPIO2 #SCK
- id: i2s_speaker
i2s_lrclk_pin: GPIO6 #LRC
i2s_bclk_pin: GPIO7 #BLCK
microphone:
- platform: i2s_audio
id: va_mic
adc_type: external
i2s_din_pin: GPIO4 #SD pin on the INMP441
channel: left
pdm: false
i2s_audio_id: i2s_in
bits_per_sample: 32 bit
speaker:
platform: i2s_audio
id: va_speaker
i2s_audio_id: i2s_speaker
dac_type: external
i2s_dout_pin: GPIO8 # DIN Pin of the MAX98357A Audio Amplifier
channel: mono
micro_wake_word:
on_wake_word_detected:
# then:
- voice_assistant.start:
wake_word: !lambda return wake_word;
- light.turn_on:
id: led_ww
red: 30%
green: 30%
blue: 70%
brightness: 60%
effect: fast pulse
models:
- model: github://esphome/micro-wake-word-models/models/v2/hey_jarvis.json
voice_assistant:
id: va
microphone: va_mic
noise_suppression_level: 2.0
volume_multiplier: 4.0
speaker: va_speaker
on_stt_end:
then:
- light.turn_off: led_ww
on_error:
- micro_wake_word.start:
on_end:
then:
- light.turn_off: led_ww
- wait_until:
not:
voice_assistant.is_running:
- micro_wake_word.start: 
AS-HA.txt (Size: 3.94 KB / Downloads: 566)
RE: AS ESPHome yaml for home assistant - eyevisions - 11-09-2024
I followed the steps as you described. Only when I turn on the LED does it not listen. It stays at inactive. Me whisper and piper installation works. What am I overlooking? thanks in advance for the response.
RE: AS ESPHome yaml for home assistant - admin - 11-09-2024
can you take some screen photo of voice assistant setting, home assistant "device" webpage of whisper and piper.
RE: AS ESPHome yaml for home assistant - eyevisions - 11-09-2024
It works now.
The only thing is that you apparently pronounce hey jarvis better than I do. If I play a video with the explanation, it responds to you fine. When I ask it something arggggggggg
RE: AS ESPHome yaml for home assistant - admin - 11-09-2024
you can use google translate to speak play voice" hey jarvis "
RE: AS ESPHome yaml for home assistant - eyevisions - 11-12-2024
Dear,
it is possible that you use an open wake word from ha itself and not in the esp itself. I have now changed it to okay nabu which is already going better.
RE: AS ESPHome yaml for home assistant - admin - 11-12-2024
the response speed is faster?
RE: AS ESPHome yaml for home assistant - eyevisions - 11-22-2024
for me de best model is alexa that listen very good. is there a way to get volume louder? The microfoon is beter than mine Telcast laptop mic special when i speak dutch to dutch assistant. The dutch assistant is not very good. I use your device as a dutch chatgpt voice assistant and for that it works great. Only i want to make mine one wakeword. Is it possible to upload the 2 file to the esp?
fun thing nobody has ever seen this device in Netherlands i think.
thx
RE: AS ESPHome yaml for home assistant - admin - 11-22-2024
" Is it possible to upload the 2 file to the esp?" what's means? i don't understand.
RE: AS ESPHome yaml for home assistant - eyevisions - 11-28-2024
Goodday i read a litlle further and i think it's not possible to put your own wakeword in the assist. when i make mine own wakeword i got 2 files *.onnx and a *.tflite. But it shall not be possible esp use microwakeword. Is it possible that in 1 yaml file to program bought gpio15 an gpio 16 leds? I try it put still getting used to the programming because file was wrong. Is there a way to control the volume or is it not possible. I love product the microfoon is very good.