+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: how to program the remote control to kc-868-h32 (/showthread.php?tid=69)
how to program the remote control to kc-868-h32 - Bmejgm - 12-12-2020
how do we program the remote control to work with the kc-868-h32 unit?
RE: how to program the remote control to kc-868-h32 - admin - 12-12-2020
what's your means? if you want to use wireless remoter , you need add "switch terminal board".
RE: how to program the remote control to kc-868-h32 - Bmejgm - 12-13-2020
yes, its the wireless remoter, and yes i have the switch terminal board, can't send the video so i will send via whatsapp
RE: how to program the remote control to kc-868-h32 - admin - 12-13-2020
How to use wireless remoter:
Before the first use, it is necessary to learn signal code the remoter with the wireless receiving module (learn two 16 key wireless remoter respectively):
1. Press the small white button on the wireless module to clear the code (about 15 seconds) until the red LED off on the wireless receiving module.
2. Press the small white button on the receiving module to learn wireless signal, and then press any number key on the remoter , such as key “1”. After learn signal successful, the red LED red on the wireless receiving module will flash several times.
At this time, the 1-16 key can be used to control each relay switch. 17-32 key learning way is same for second remoter and wireless receive module.
RE: how to program the remote control to kc-868-h32 - Bmejgm - 12-14-2020
thanks
RE: how to program the remote control to kc-868-h32 - Kam5 - 12-27-2020
(12-13-2020, 01:47 AM)admin Wrote: How to use wireless remoter:I don't need to use channel 17-32 . Can I connect 2 remote controllers for channel 1-16 ?
Before the first use, it is necessary to learn signal code the remoter with the wireless receiving module (learn two 16 key wireless remoter respectively):
1. Press the small white button on the wireless module to clear the code (about 15 seconds) until the red LED off on the wireless receiving module.
2. Press the small white button on the receiving module to learn wireless signal, and then press any number key on the remoter , such as key “1”. After learn signal successful, the red LED red on the wireless receiving module will flash several times.
At this time, the 1-16 key can be used to control each relay switch. 17-32 key learning way is same for second remoter and wireless receive module.
How I can do it ?
RE: how to program the remote control to kc-868-h32 - admin - 12-27-2020
this video for you: https://youtu.be/4_YDX3bGI64