KinCony AS ESP32-S3 voice assistant released - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5) +--- Thread: KinCony AS ESP32-S3 voice assistant released (/showthread.php?tid=6905)

KinCony AS ESP32-S3 voice assistant released - admin - 10-22-2024 KinCony ESP32-S3 voice assistant based on ESP32-S3-WROOM-1U (N16R8) wifi chip. It use by I2S INMP441 microphone and MAX98357A amplifier. SD card socket on PCB. there are WS2812B RGB LED you can use for assistant. It also have IR receiver and many free GPIOs on PCB. Model No. KinCony AS Description: KinCony ESP32-S3 voice assistant – AS Power supply: 5V DC by USB cable Processor: ESP32-S3-WROOM-1U (N16R8) Size: 118mm*70mm*70mm interfaces: WiFi,Bluetooth,USB-Mini SD Card: inside of BOX WS2812B RGB LED: 2 different channel of GPIO IR receiver: HS0038 433M receiver PCB pins reserved Microphone: INMP441 (I2S bus) Amplifier:MAX98357A (MAX:3.2W) free GPIOs for DIY extend： 13 pins hardware details: software solution: 1. install Speech-to-text add-on “faster-whisper” on home assistant. 2. install Text-to-speech add-on “piper” on home assistant. 3. download AS’ ESPHome yaml file from KinCony forum, modify wifi router SSID and PASSWORD. 4. download firmware to AS(ESP32-S3). 5. begin use in home assistant. Easy integrate KinCony ESP32-S3 voice assistant to home assistant by ESPHome. You can download yaml file from KinCony forum.