KC868-A8 board esphome + Tuya - Printable Version

KC868-A8 board esphome + Tuya - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A8 (https://www.kincony.com/forum/forumdisplay.php?fid=23)
+--- Thread: KC868-A8 board esphome + Tuya (/showthread.php?tid=6986)

Pages: 1 2

KC868-A8 board esphome + Tuya - gnetinternet@gmail.com - 11-03-2024

Hello. I'm configuring the KC868-A8 board with Esphome and the Tuya license. However, I found some errors and would like to share them for a possible solution. KC868-A8 board esphome + Tuya
It's giving an error that I don't know exactly. error image attached.

# Basic Config
esphome:
name: kc868-a8-contato-web-dht-tuya2
platform: ESP32
board: esp32dev

external_components:
- source:
type: git
url: https://github.com/hzkincony/esphome-tuya-iot
ref: v1.2.0

# Enable logging
logger:
baud_rate: 0

api:
encryption:
key: "It2KB/xCg0EuwXMc1KyiTXRTSjr0hdQXmxQXnwIVmOE="

ota:
- platform: esphome
password: "70604538ddb4bdb4362c2d63114dfb1d"

i2c:
sda: 4
scl: 5
scan: true
id: bus_a

ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO17_OUT
phy_addr: 0

# Add web server
web_server:
port: 80
auth:
username: admin
password: "admin"

text_sensor:
- platform: homeassistant
name: "Casa Inteligente"
id: home_assistant_text
entity_id: input_text.test

pcf8574:
- id: 'pcf8574_hub_out_1' # for output channel 1-8
address: 0x24

- id: 'pcf8574_hub_in_1' # for input channel 1-8
address: 0x22

time:
- platform: homeassistant
id: homeassistant_time

# Individual outputs
switch:
- platform: gpio
name: "light1"
id: light1
pin:
pcf8574: pcf8574_hub_out_1
number: 0
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output1", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output1", false);

- platform: gpio
name: "light2"
id: light2
pin:
pcf8574: pcf8574_hub_out_1
number: 1
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output2", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output2", false);

- platform: gpio
name: "light3"
id: light3
pin:
pcf8574: pcf8574_hub_out_1
number: 2
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output3", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output3", false);

- platform: gpio
name: "light4"
id: light4
pin:
pcf8574: pcf8574_hub_out_1
number: 3
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output4", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output4", false);

- platform: gpio
name: "light5"
id: light5
pin:
pcf8574: pcf8574_hub_out_1
number: 4
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output5", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output5", false);

- platform: gpio
name: "light6"
id: light6
pin:
pcf8574: pcf8574_hub_out_1
number: 5
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output6", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output6", false);

- platform: gpio
name: "light7"
id: light7
pin:
pcf8574: pcf8574_hub_out_1
number: 6
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output7", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output7", false);

- platform: gpio
name: "light8"
id: light8
pin:
pcf8574: pcf8574_hub_out_1
number: 7
mode: OUTPUT
inverted: true
restore_mode: RESTORE_DEFAULT_ON
on_turn_on:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output8", true);
on_turn_off:
- lambda: !lambda |-
id(tuya_iot_component).property_report("output8", false);

binary_sensor:
- platform: gpio
name: "input1"
on_press:
then:
- switch.toggle: light1
pin:
pcf8574: pcf8574_hub_in_1
number: 0
mode: INPUT
inverted: true

- platform: gpio
name: "input2"
on_press:
then:
- switch.toggle: light2
pin:
pcf8574: pcf8574_hub_in_1
number: 1
mode: INPUT
inverted: true

- platform: gpio
name: "input3"
on_press:
then:
- switch.toggle: light3
pin:
pcf8574: pcf8574_hub_in_1
number: 2
mode: INPUT
inverted: true

- platform: gpio
name: "input4"
on_press:
then:
- switch.toggle: light4
pin:
pcf8574: pcf8574_hub_in_1
number: 3
mode: INPUT
inverted: true

- platform: gpio
name: "input5"
on_press:
then:
- switch.toggle: light5
pin:
pcf8574: pcf8574_hub_in_1
number: 4
mode: INPUT
inverted: true

- platform: gpio
name: "input6"
on_press:
then:
- switch.toggle: light6
pin:
pcf8574: pcf8574_hub_in_1
number: 5
mode: INPUT
inverted: true

- platform: gpio
name: "input7"
on_press:
then:
- switch.toggle: light7
pin:
pcf8574: pcf8574_hub_in_1
number: 6
mode: INPUT
inverted: true

- platform: gpio
name: "input8"
on_press:
then:
- switch.toggle: light8
pin:
pcf8574: pcf8574_hub_in_1
number: 7
mode: INPUT
inverted: true

- platform: gpio
name: "a8-s3"
pin:
number: 32
inverted: true

- platform: gpio
name: "a8-s4"
pin:
number: 33
inverted: true

one_wire:
- platform: gpio
pin: GPIO14

sensor:
- platform: dallas_temp
name: "Temperatura QCC"
id: temperatura_1
address: 0x06136e7e1f64ff28 # Endereço específico do sensor
accuracy_decimals: 1 # Precisão do sensor em casas decimais
update_interval: 30s # Intervalo de atualização dos dados

- platform: dht
pin: GPIO13 # Ajuste para o pino que você está usando
model: DHT22 # Substitua pelo modelo do seu sensor (DHT11, DHT22, AM2301, etc.)
temperature:
name: "Temperatura externa"
humidity:
name: "Umidade externa"
update_interval: 30s # Ajuste o intervalo de atualização conforme necessário

tuya_iot:
id: tuya_iot_component
product_id: xxx
device_id: xxx
device_secret: xxx
region: us # eu, us, eus, weu, in, cn
# eu: Central Europe Data Center
# us: US West Data Center
# eus: US East Data Center
# weu: Western Europe Data Center
# in: India Data Center
# cn: Chinese Data Center

on_event:
- event_name: property/set
then:
- lambda: !lambda |-
// Append the required switch in switch_map to respond to commands issued by Tuya.
static std::map<float, switch_::Switch*> switch_map {
{ 1, id(light1) },
{ 2, id(light2) },
{ 3, id(light3) },
{ 4, id(light4) },
{ 5, id(light5) },
{ 6, id(light6) },
{ 7, id(light7) },
{ 8, id(light8) },
};
......>

RE: KC868-A8 board esphome + Tuya - admin - 11-04-2024

tuya_iot:
id: tuya_iot_component
product_id: xxx
device_id: xxx
device_secret: xxx
region: us # eu, us, eus, weu, in, cn

in your code, xxx means replace with your tuya license information.

RE: KC868-A8 board esphome + Tuya - gnetinternet@gmail.com - 11-04-2024

Friend, I know that, I did the procedure on the license, however, that is not the problem. I posted the image of the error next to it. I would really like your help. ERROR --->

src/esphome/components/tuya_iot/tuya_iot_component.cpp: In the lambda function:
src/esphome/components/tuya_iot/tuya_iot_component.cpp:167:96: error: Invalid initialization of reference of type 'const json_parse_t&' {aka 'const std::function<bool(ArduinoJson6185_D1::ObjectRef)>&'} of the expression of type 'esphome::tuya_iot::TuyaIotComponent: Confused

ubscribe_json(const string&, const mqtt_json_callback_t&, uint8_t)::<lambda(const string&, const string&)>::<lambda(ArduinoJson::JsonObject)>'
json::parse_json(payload, [topic, callback](JsonObject root) { callback(topic, root); });
^
In the file included at src/esphome/core/string_ref.h:10, ....

RE: KC868-A8 board esphome + Tuya - admin - 11-05-2024

post your whole yaml file at here or send to email: web@kincony.com

RE: KC868-A8 board esphome + Tuya - gnetinternet@gmail.com - 11-05-2024

[anexo=6367]

(11-05-2024, 12:20 AM)administrador Wrote: publique seu arquivo yaml completo aqui ou envie para o e-mail: web@kincony.com

Vai o txt.

RE: KC868-A8 board esphome + Tuya - admin - 11-06-2024

Because ESPHome have updated, so we updated tuya component also.
just use new version will be ok.

external_components:
- source:
type: git
url: https://github.com/hzkincony/esphome-tuya-iot
ref: v1.2.1

switch to v1.2.1 , not use v1.2.0

RE: KC868-A8 board esphome + Tuya - gnetinternet@gmail.com - 11-06-2024

It worked, however, now I can't access the KC-868-A8 device. The lan port does not activate, nor does the wifi connect.

RE: KC868-A8 board esphome + Tuya - admin - 11-06-2024

connect ethernet cable with your router, after download re power on of your board, check in your router, whether can find KC868-A8 board.

RE: KC868-A8 board esphome + Tuya - gnetinternet@gmail.com - 11-07-2024

I did this procedure, I even use mikrotik router, I even check the logs. Both via WiFi and wired, they don't work. Even the LAN port LED doesn't light up

RE: KC868-A8 board esphome + Tuya - admin - 11-07-2024

now your yaml is config for ethernet, if you want config by wifi, need modify the yaml. you can modify change for wifi , test it. if also can't work, take a video send to us.