+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: Help whit update Cold CPU BOOTLOADER by Jlink tool. (/showthread.php?tid=7042)
Help whit update Cold CPU BOOTLOADER by Jlink tool. - itzek - 11-10-2024
Hello admin,
I'm trying to update a version in my colb to get tuya support according to the following link:
https://www.kincony.com/forum/showthread.php?tid=2656
I use the j-link tool and it can't connect to the component. I installed the driver and connected everything according to the manual, what am I doing wrong? I am attaching pictures of the processor and the error
RE: Help whit update Cold CPU BOOTLOADER by Jlink tool. - admin - 11-11-2024
GD32 chip is not enough memory for running Tuya, if you want to use tuya, need replace CPU with AT32F403AVGT7 chip. Then use AT-link usb cable to download firmware.
RE: Help whit update Cold CPU BOOTLOADER by Jlink tool. - itzek - 11-11-2024
How do I replace the processor? Buy a processor and weld it
or
i need to buy a new colb
RE: Help whit update Cold CPU BOOTLOADER by Jlink tool. - admin - 11-11-2024
i suggest you buy a new KC868-COLB, replace it really cost time.