KinCony G1 ESP32-S3 SIM7600E 4G Module released - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5) +--- Thread: KinCony G1 ESP32-S3 SIM7600E 4G Module released (/showthread.php?tid=7182)

KinCony G1 ESP32-S3 SIM7600E 4G Module released - admin - 12-06-2024 KinCony G1 ESP32 4G module based on ESP32-S3-WROOM-1U (N16R8) and SIMCOM SIM7600E series chip. G1 have RS485 port and many free GPIOs for user.You can write any code by Arduino IDE / Micro Python / ESP-IDF development tool to ESP32 module. Everyone can modify and change the code for your own smart home automation system project. it support use by ESPHome for home assistant. Such as send SMS and make CALL by ESPHome. for example, when sensor trigger, it can send SMS to user's mobile phone. Just according to SIMCOM AT command, you can do anything. Model No. KinCony G1 Description: KinCony 4G Module – G1 Power supply: 12-24V DC Processor: ESP32-S3-WROOM-1U (N16R8) 4G Module: SIM7600E-L1C SIM Card: Nano SIM Size: 95mm*84mm*59mm interfaces: Ethernet(RJ45)-LAN 100Mbps IPv4/IPv6,WiFi,RS485,Bluetooth,USB-C,I2C extender, LCD, Buttons Installation method: DIN RAIL LCD: SSD1306 I2C display Antenna Extender: ESP32-S3, 4G, GPS Inputs: 2 buttons: 1:ESP32 Reset 2:ESP32 Download 12 buttons: Telephone Keyboard 1-Wire GPIO: 4CH (with pull-up resistance on PCB) free GPIO: 3CH (without pull-up resistance on PCB, connect with ESP32 pin directly) free GPIO: 4CH (without ESD diode on PCB):