+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A4S (https://www.kincony.com/forum/forumdisplay.php?fid=41)
+--- Thread: Check about connections (/showthread.php?tid=7217)
Check about connections - Bergoglio - 12-12-2024
Good afternoon,
I want to control 2 different devices fans with 0-10v capabilities of one KC868-A4S but I'm not sure about wiring.
For the first fan from AFL Motors (file 122) these are the connections that I plan :
- 0-10 VDC yellow on fan with AO1 on KC868-A4S
- GND blue on fan with GND after AO1 on KC868-A4S
for the second fan from Aermec (file 22) these are the connections that I plan :
- 0-10V IN V2 blue on Aermec with AO2 on KC868-A4S
- 0V V1 grey on Aermec with GND after AO1 on KC868-A4S
Am I right or wrong ? If I'm wrong, what are the right connections ?
Thanks
RE: Check about connections - admin - 12-15-2024
connection is ok, but need to test with fan.
RE: Check about connections - Bergoglio - 12-15-2024
Thank You very much.