+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: Problem with IFTTT automation (/showthread.php?tid=7236)
Problem with IFTTT automation - Poczwara13 - 12-15-2024
Hello,
based on the IFTTT rules, I try to control two relay outputs, which are to be dependent on 4 inputs. For this purpose, I use (logical „AND”) in the rules settings. Unfortunately, the driver does not respond, after unchecking (logical"AND"), the driver executes the rule independently from each declared input of the driver.
I also have a problem with giving names to inputs and outputs, they move or completely delete after refreshing the page.
I have no idea what the problem is, please help.
RE: Problem with IFTTT automation - admin - 12-16-2024
1. which board model you are using?
2. which KCS firmware version using?
3. post your IFTTT setting screen image.
RE: Problem with IFTTT automation - Poczwara13 - 12-16-2024
Attached are screenshots from the user panel.
RE: Problem with IFTTT automation - admin - 12-16-2024
Do you want IF (DI7=false and DI8=false and DI9=false and DI10=false) THEN DO11, DO15 = OFF ?
RE: Problem with IFTTT automation - Poczwara13 - 12-16-2024
Exactly like this, with a single IF there is not the slightest problem.
RE: Problem with IFTTT automation - admin - 12-16-2024
ok, this week will test it.