relay last state - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: DIY Project (https://www.kincony.com/forum/forumdisplay.php?fid=3) +--- Thread: relay last state (/showthread.php?tid=7252)

relay last state - icemannz - 12-22-2024 Hi, I would like to get a KC868-a6 board with the relays to run a home automation project. The question I have is if it is possible to have the relays resume their last state if there is a power failure or similar. So if they are reset, they would resume the last known state. Is this possible and how would I accomplish this, I have looked at using a MQTT system but I think it would be better if the KC868 board is able to store the state of the relays and then resume the state if reset. RE: relay last state - admin - 12-22-2024 download KCS firmware, there is an option "keep output after restart" , just enable it. RE: relay last state - icemannz - 12-22-2024 thanks that is good to know