+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=60)
+--- Forum: B16M (https://www.kincony.com/forum/forumdisplay.php?fid=61)
+--- Thread: [question]Max current in 12V DC (/showthread.php?tid=7319)
[question]Max current in 12V DC - chaka - 01-04-2025
Hi, need to power some high current (~9A) devices at 12V DC.
Does MOSFET relays support 10A 12V DC?
I see in specs 10A but doesn't say if its AC or DC, please clarify.
RE: [question]Max current in 12V DC - admin - 01-05-2025
the MOSFET MAX support 10A for DC load, for safety , not use full current.
every 8 output terminal use by one DC point (GREEN TERMINAL), if use output1-output8 all use for 9A load, MAX 9A*8=72A, so the "DC" point will be dangerous, one "DC" point platic green terminal MAX suport 10A. so if only output 9A for output1, output2-output8 not used or use by low current, will be OK.
RE: [question]Max current in 12V DC - chaka - 01-05-2025
Thanks for help. Do you have board for my need?
I have 2 devices running on 9A + 4 devces running <0.5A DC . Total need is >20A.
RE: [question]Max current in 12V DC - admin - 01-05-2025
you can add extend relay module (KC868-E16v2) , so that every channel can work with MAX 16A DC load.
here is details: https://www.kincony.com/omron-din-rail-relay-module.html