+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: kc868 M16-V2 (/showthread.php?tid=7425)
kc868 M16-V2 - athxp - 01-20-2025
hi, i would be interested in using kc868 M16-V2 with home assistant. but i would need to know the power of each channel (and not the current) can the board calculate it for each channel?
RE: kc868 M16-V2 - admin - 01-20-2025
sure, M16v2 can read CURRENT and VOLTAGE. you can set the POWER=CURENT * VOLTAGE in home assistant.
RE: kc868 M16-V2 - athxp - 01-23-2025
Well! Which calipers would be best to use for greater precision? V or mA?
I would also need to carry some pliers at a distance of about 20 metres, is this a problem?
RE: kc868 M16-V2 - admin - 01-24-2025
use mA or V according to your CT clamp sensor type.
RE: kc868 M16-V2 - athxp - 01-25-2025
ok, but is it a problem for a distance of 20 meters? does the reading remain accurate?
RE: kc868 M16-V2 - admin - 01-26-2025
20 meter for CT clamp sensor is no problem.
RE: kc868 M16-V2 - athxp - 01-26-2025
well, I just placed the order on the kincony website. I hope to be able to work well on homeassistant; )
RE: kc868 M16-V2 - admin - 01-26-2025
ok, after china new year holidays, we will send it.
RE: kc868 M16-V2 - athxp - 01-26-2025
perfect, thanks!