+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: KC868A6 (/showthread.php?tid=7550)
KC868A6 - Chris89 - 02-04-2025
I have bought a kincony 868A6. The first time, red led power in on and 6 other red leds are blinking and clicking. I have a 12V power. But now only the red led power is on. No blinking and no clicking for the 6 red leds.
Unpossible to use flashtools. The board is recognized whan i put the usb. But nothing other. Is the board out of order? I try to reset it with the button. Nothing.
What can i do? Send to the seller? thanks for your answer
Christian (France)
RE: KC868A6 - admin - 02-05-2025
because now firmware inside, now you need to download KCS v2 firmware firstly.
here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html