+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: "KCS" v3 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=74)
+--- Forum: "KCS" v3 firmware (https://www.kincony.com/forum/forumdisplay.php?fid=75)
+--- Thread: "KCS" v3 firmware Modbus protocol document (/showthread.php?tid=7618)
"KCS" v3 firmware Modbus protocol document - admin - 02-15-2025
Note: This protocol document use for KinCony ESP32-S3 smart controller:
you need to download KCS v3 firmware to ESP32-S3 firstly.
Different board will have different channel of digital output, digital input , ADC, DAC,IR, RF. So the protocol is same , just according to the hardware resource to set channel number.
KCSv3-protocol-ModBus.pdf (Size: 264.96 KB / Downloads: 24)
for IR commands: