+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: Input problem 868 A6 (/showthread.php?tid=7772)
Input problem 868 A6 - bednark - 03-08-2025
Hello everyone,
i am setting up my 868 A6 but i cant get any input to the device,
Shorting GND with any pin does nothing, applying voltage in input does nothing as well. when i reverse input the webui still displays no input.
Should i chage something in the settings?
ive used this manual:
https://www.kincony.com/images/user-guide/KCS_V2/KCS_user_guide_v2.0.pdf
Please help me.
RE: Input problem 868 A6 - admin - 03-09-2025
do you have download KCS v2 firmware firstly?
here is online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
RE: Input problem 868 A6 - bednark - 03-09-2025
(Today, 12:57 AM)admin Wrote: do you have download KCS v2 firmware firstly?
here is online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
Problem solved!
Thank you very much!!
RE: Input problem 868 A6 - admin - 03-09-2025
ok, good.