+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" v2 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: KC868-A16 rev. 1.6 firmware issue (/showthread.php?tid=7886)
KC868-A16 rev. 1.6 firmware issue - jollyroger - 03-31-2025
Hi, I have the board in subject, with a newest firmware than the 1.0.19 (I test 2.2.2 - 2.2.10- 2.2.12) the "Input" page show only the two columns and i cannot associate te input to the output.
Can anyone help me with this issue?
Many thanks.
RE: KC868-A16 rev. 1.6 firmware issue - admin - 03-31-2025
KCS v2 use by IFTTT page. please set INPUT trigger OUTPUT by IFTTT.
here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
RE: KC868-A16 rev. 1.6 firmware issue - jollyroger - 04-01-2025
(03-31-2025, 11:19 PM)admin Wrote: KCS v2 use by IFTTT page. please set INPUT trigger OUTPUT by IFTTT.
here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
Ok, thanks for the answer, now understand the correct function.