+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: M30 negative power (/showthread.php?tid=7888)
M30 negative power - Linus68 - 04-01-2025
Hi
have the M30 V2.4.10
One clamp is in postive direction one in negative installed, but have always positive power at display.
I can not get negative power. What can this be?
RE: M30 negative power - admin - 04-02-2025
you can try to test with V2.4.7: https://www.kincony.com/forum/showthread.php?tid=6604
make sure your CT clamp is 2000:1, so that can use for M30 board.
you can test "postive direction" and "negative direction" by one CT sensor.
RE: M30 negative power - Linus68 - 04-03-2025
Hi
got it running.
On purchased part old Bootloader was on it.
With new one it is now working
RE: M30 negative power - admin - 04-04-2025
ok