+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: M30 isn't working properly? (/showthread.php?tid=8343)
M30 isn't working properly? - margusveer - 07-26-2025
Hi!
I got to testing with my newly purchased devices and it seems like my M30 is not working properly. I powered it up, but LED's don't light up and network adapter don't show any LED's as well
PSU is lit red and RUN is blinking
I made little video as well :
RE: M30 isn't working properly? - admin - 07-27-2025
because you need to download KCS firmware by USB-C cable firstly.
RE: M30 isn't working properly? - margusveer - 07-27-2025
(07-27-2025, 12:44 AM)admin Wrote: because you need to download KCS firmware by USB-C cable firstly.
Thanks, I've been working on Arduino projects for a while, but you've definitely made a video or posted somewhere about how to upload it - the computer recognized the device beautifully on port COM8 - what next?
ok little google and seems I find this one already
https://www.kincony.com/forum/showthread.php?tid=6475&pid=16870
or this one
https://www.kincony.com/esp32-kcsv2-firmware.html
RE: M30 isn't working properly? - margusveer - 07-27-2025
(07-27-2025, 12:44 AM)admin Wrote: because you need to download KCS firmware by USB-C cable firstly.
ok seems I need some hint - where I find latest version to my M30 - to upload, it over the KSC to my device ?
finally I find this :
https://www.kincony.com/how-to-use-kcsv3-firmware-esp32-board.html
But now I need some hint where is the latest version for M30 what I can upload ?
RE: M30 isn't working properly? - admin - 07-27-2025
download this newest M30 firmware for ESP32: https://www.kincony.com/forum/showthread.php?tid=6760
how to download, you can see here: https://www.kincony.com/forum/showthread.php?tid=6475