+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: please help to use mqtt for 32bs (/showthread.php?tid=997)
please help to use mqtt for 32bs - engmohades - 10-31-2021
I installed virtual home assistant and i put ip of home assistant in edite node mqtt in & out But no any response and not read state or change chanel relay ( On or Off ) of 32bs relay
and not appear thebutton switch in home assistant dashbord
RE: please help to use mqtt for 32bs - admin - 10-31-2021
1. you have not use the user name and password for your Mosquito, but i have seen set in your H32BS' network setting.
2. H32BS already support MQTT, so you can integrate directly to home assistant without use Node-Red.
3. suggest use ethernet MQTT, now i have seen you are using wifi by MQTT.
4. i think you can do as this video tour:https://youtu.be/Yrat7hVzXRw H32BS and H32B is same way for integrate with home assistant.
5. if you also have problems, you can add our technical support whatsapp, we can use teamviewer remote control your computer to help you config.