KC868-HA RS485 button adapter firmware and PC software v1.0.4.0904 update

[admin]

improvement:

added "EdgeEvent mode" for KC868-HA. 
you can define every button’s “RisingEdge” and “FallingEdge” for “4 different actions”.
RisingEdge: press download button
FallingEdge: release button

4 different actions code:

NoDef: do nothing
EvtON: ON
EvtOFF: OFF
EvtTog: TOGGLE

   

PC software (HA485_Ctrl_V1.0.4.0904) download:

  HA485_Ctrl_V1.0.4.0904.zip (Size: 911.51 KB / Downloads: 374)

firmware BIN file (HA485_KU_V106_221102_SP230903.bin) for KC868-HA download:

  HA485_KU_V106_221102_SP230903.zip (Size: 6.45 KB / Downloads: 349)

bootload tool download


KC868-HA protocol document download:
https://www.kincony.com/download/KC868-H...d_v106.pdf

KC868-HA online guide:
https://www.kincony.com/how-to-use-rs485...apter.html

[bhaskey78]

Hi,
Computer is detecting serial port, but in HA485 config tool serial port is not detected.

[admin]

1: insert usb-rs485 adapter
2: open software

[kglavas97]

Hi, can you make a video with instructions on how to program the bootloader and use it with esphome.

[admin]

do you want use KC868-HA board with esphome in home assistant? we will make the video tour soon.

[Sewek0]

1: insert usb-rs485 adapter
2: open software

I did like in this tutortial. All the time I get an error.

   

[NicTheModder]

1: insert usb-rs485 adapter
2: open software

I did like in this tutortial. All the time I get an error.

SewekO,

This error can be avoided with these mods;
- Start software as administrator
- Plug out all connections, and start again...

Succes :-)
Nic

PS: don't forget to upgrade everithing.

[Sewek0]

1: insert usb-rs485 adapter
2: open software

I did like in this tutortial. All the time I get an error.

SewekO,

This error can be avoided with these mods;
- Start software as administrator
- Plug out all connections, and start again...

PS: don't forget to upgrade everithing.

Hi, Nick 
I start up software with admin privages.
Than disconnect USB to rs485 
Wait 5 sec and connect again After that I got again this message
I am using Windows 11 but I do not thing that this is important.
But if a do it with USB to TTL (CH340) or (CP2101) ther is no errors but I can not open bootloader.

[admin]

can you try with another USB port, or another computer? whether have another problem used COM10?