Connect um330 and kc828 a16

[gtd0916]

if you read by current, can't read by voltage.

If I add a 250Ω resistor across the 4–20mA output (+/−), the voltage across it should become 1–5V (max 5V at 20mA), so it should be measurable by  0–5V analog input. Is this correct and supported?

[gtd0916]

I’ve connected the CLOB, but I don’t know when the data is received. Can the timing be set?

[admin]

what you want to do? monitor analog data?

[gtd0916]

what you want to do? monitor analog data?

I solved it by manually fetching the data every 2 seconds. Is there a better approach?

alias: COLB - Poll analog (A_FF) every 2s
mode: single
triggers:
  - seconds: /2
    trigger: time_pattern
actions:
  - data:
      topic: COLB/xxxxxxxxxxxx/set
      payload: "{State=A_FF}"
    action: mqtt.publish

[admin]

———–Enable/Disable Auto Report Function for KC868-COLB—————

payload={Auto_upload=1} Enable auto report function

feedback: {“upload”:{”ON”,1}}

payload={Auto_upload=0} Disable auto report function

feedback: {“upload”:{”ON”,0}}