KCS v2.2.4 versus ESPHOME

[Philadam]

I am testing ds18b20 sensors with KC868-AM I have 8 sensors attached, 2 per input terminal. 

With KCS v2.2.4 firmware I get results from at least 4 sensors. See picture.

However when I try to setup in ESPHOME I consistently getting the following:

20:42:58][C][gpio.one_wire:016]: GPIO 1-wire bus:
[20:42:58][C][gpio.one_wire:017]:  Pin: GPIO5
[20:42:58][C][gpio.one_wire:080]:  Found devices:
[20:42:58][C][gpio.one_wire:082]:    0x8c000000306c8028 (DS18B20)
[20:42:58][C][gpio.one_wire:082]:    0xc800000030c41b28 (DS18B20)
[20:42:58][C][gpio.one_wire:016]: GPIO 1-wire bus:
[20:42:58][C][gpio.one_wire:017]:  Pin: GPIO14
[20:42:58][W][gpio.one_wire:078]:  Found no devices!
[20:42:58][C][gpio.one_wire:016]: GPIO 1-wire bus:
[20:42:58][C][gpio.one_wire:017]:  Pin: GPIO13
[20:42:58][W][gpio.one_wire:078]:  Found no devices!
[20:42:58][C][gpio.one_wire:016]: GPIO 1-wire bus:
[20:42:58][C][gpio.one_wire:017]:  Pin: GPIO33
[20:42:58][C][gpio.one_wire:080]:  Found devices:
[20:42:58][C][gpio.one_wire:082]:    0xfe00000030e49428 (DS18B20)
[20:42:58][C][gpio.one_wire:082]:    0x770000003065cc28 (DS18B20)

It cannot find any sensors on gpio 13 and 14. This was working before the ESPHOME update to 2024.6.1

Any idea on what might have happened?

---

Also tested with one ds18b20 sensor in each one of the sensor inputs with KCS v2.2.4 firmware and each individual sensor input worked.

[admin]

i checked with esphome webpage guide, old ds18b20 online guide webpage unavailabe.
https://esphome.io/components/sensor/dallas_temp.html now it's showed "temp".html, i think maybe ESPHome developer will fix this problem, maybe you can wait some days. or you can recover your ESPHome to old version.