Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"KCS" v2.2.2 firmware BIN file download
#1
Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

v2.2.2 improment:
1. fixed bug can't show negative temperature with DS18B20


Attached Files
.zip   KCS_KC868_A8M_V2.2.2.zip (Size: 796.94 KB / Downloads: 450)
.zip   KCS_KC868_A8S_V2.2.2.zip (Size: 798.07 KB / Downloads: 309)
.zip   KCS_KC868_A16_V2.2.2.zip (Size: 787.79 KB / Downloads: 718)
.zip   KCS_KC868_A16S_V2.2.2.zip (Size: 798.17 KB / Downloads: 339)
.zip   KCS_KC868_A4S_V2.2.2.zip (Size: 797.08 KB / Downloads: 258)
.zip   KCS_KC868_A4_V2.2.2.zip (Size: 776.82 KB / Downloads: 517)
.zip   KCS_KC868_UAIR_V2.2.2.zip (Size: 763.55 KB / Downloads: 228)
.zip   KCS_KC868_A2_V2.2.2.zip (Size: 786.48 KB / Downloads: 261)
.zip   KCS_KC868_AG_V2.2.2.zip (Size: 760.46 KB / Downloads: 324)
.zip   KCS_KC868_AI_V2.2.2.zip (Size: 784.33 KB / Downloads: 255)
.zip   KCS_KC868_AIO_V2.2.2.zip (Size: 797.63 KB / Downloads: 171)
.zip   KCS_KC868_AK_V2.2.2.zip (Size: 762.76 KB / Downloads: 192)
.zip   KCS_KC868_AM_V2.2.2.zip (Size: 773.67 KB / Downloads: 216)
.zip   KCS_KC868_AP_V2.2.2.zip (Size: 779.5 KB / Downloads: 134)
.zip   KCS_KC868_ASR_V2.2.2.zip (Size: 751.31 KB / Downloads: 143)
.zip   KCS_KC868_E16S_V2.2.2.zip (Size: 785.8 KB / Downloads: 197)
.zip   KCS_KC868_A32M_V2.2.2.zip (Size: 799.77 KB / Downloads: 263)
.zip   KCS_KC868_A64_V2.2.2.zip (Size: 781.64 KB / Downloads: 182)
.zip   KCS_KC868_A128_V2.2.2.zip (Size: 781.35 KB / Downloads: 142)
.zip   KCS_KC868_A8_V2.2.2.zip (Size: 780.49 KB / Downloads: 572)
.zip   KCS_KC868_A6_V2.2.2.zip (Size: 772.55 KB / Downloads: 348)
.zip   KCS_KC868_A32_V2.2.2.zip (Size: 781.38 KB / Downloads: 186)
.zip   KCS_A24_V2.2.2.zip (Size: 747.66 KB / Downloads: 95)
Reply
#2
is there latest firmware for A32 board?
Reply
#3
Yes.
Reply
#4
Hi, I downloaded the KCS_KC868_A8_V2.2.2.bin.
Seems I cant bind input with output. Am I  missing something or should I reload another version?
Thank you
Reply
#5
after download firmware, then make IFTTT command . set DI trigger DO.
Reply
#6
A24 will be supported?
Reply
#7
A24 will support in furture, now developing new KCS firmware for A24.
Reply
#8
(12-30-2023, 11:27 PM)admin Wrote: after download firmware, then make IFTTT command . set DI trigger DO.

Thank you Wink   ( stupid me Confused )
Reply
#9
If possible to add several DS18B20 temperature sensors
Reply
#10
KCS support one GPIO by one sensor. if you use ESPHome, support one GPIO use for multi DS18B20 sensor.
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)