COL + rs485 meter

[athxp]

HI,
I have a Kincony RS-484 meter. I would like to use it to monitor a photovoltaic system and carry out automations with COL.
we are talking about around 6000-6500w of power and currents around 30A. will the meter have problems?
Furthermore, can I program COL using the simple IFTTT rules linked to the meter measurements?
 thanks

[admin]

take a photo, there have lable on the meter , what MAX current.
COLB PC software only use for monitor energy meter data , not use by IFTTT.
if you want to create IFTTT with meter, suggest add to home assistant software.

[athxp]

the meter shows 40A max, it shouldn't have any problems with around 6kw which is around 30A.
the problem is that I can't do automations with COL.

I was therefore thinking of a meter like this, which returns a 1-5V output. with this in theory I should be able to use an analog input.

https://it.aliexpress.com/item/400000475...17073463_1

[admin]

make sure if the sensor can output DC 0-5v , so that you can use analog input ports of KC868-COL