Kincony Controller Application "AND/"OR" Statement

[subas]

   
dear admin

I need some help. please explain how do you place a "AND" statement "OR" statement in the Kincony Controller Application as attached?

My example would be:-

1. Run the pump (Relay 32) for 2min AND if Water Float is empty shutoff pump (Relay 32)

I can find the "AND" statement "OR" statement on the application.

Thank you

Regards
Subas

[admin]

IF command list all is "AND" logical. if you add IF command list for A , B, C. that means A and B and C
if you create two IFTTT command, that is "OR", such as you create IFTTT command number-1 and number-2. number-1 and number-2 IFTTT command is "OR" logical.

[subas]

IF command list all is "AND" logical. if you add IF command list for A , B, C. that means A and B and C
if you create two IFTTT command, that is "OR", such as you create IFTTT command number-1 and number-2. number-1 and number-2 IFTTT command is "OR" logical.

Dear Admin.

Thank you for the answers.
Do you have a YouTube video on these "AND" / "OR" commands?

Regards

[admin]

now not have this video , if you want, we can make a video tour.

[subas]

now not have this video , if you want, we can make a video tour.

Dear Admin.

If you can make a very short video showing a Temperature sensor and a Digital In will be perfect. 

For example, 

a) IF Temp is above 30deg C "AND" Digital Input (DI) is a "1" then Relay32 "OPEN" 

b) IF Temp is above 30deg C "OR" Digital Input (DI) is a "1" then Relay31 "OPEN"

Regards

[admin]

now the DI is judge by rising level or falling level means trigger.
such as :ａ） IF Temp is above 30deg C "AND" Digital Input (DI) is ↑ THEN trigger. whether OK?
b) IF Temp is above 30deg C "OR" Digital Input (DI) is a ↑ then Relay31 "OPEN" whether OK?