A16: IFTTT Time based actions not working

[sebfromgermany]

Hello.
I set up an A16 device with the software version v.2.2.12. The display of the time on index page is still not correct. It should always follow the format YYYY-MM-DD HH:MI:SS.
Unfortunatlely the date & time is displayed like this: "2025-02.27 7:5:27" Please see attached image.

In addition to that, the IFTTT time function is not working. When time is reached, the configured output is not switched on.
What am I doing wrong?

[admin]

can you change to UTC+8 for a test , whether timer work well.

[sebfromgermany]

can you change to UTC+8 for a test , whether timer work well.

Hello.

Thank you for the reply. I did this several times on 3 different A16s. It did not work on any device. :-(

[admin]

take a photo of your board, how you wire cable.

[sebfromgermany]

take a photo of your board, how you wire cable.

Please find picture in the attachment.
When I manually swich on channel 15 (Monitor page) it works fine.

[twostar]

In addition to that, the IFTTT time function is not working. When time is reached, the configured output is not switched on.

The firmware gets the UTC adjustment wrong, there's a thread somewhere that covers this.  So you need to figure out what time the board thinks it currently is and then adjust the time setting in the IFTTT rule to match that rather than the actual time.

[sebfromgermany]

In addition to that, the IFTTT time function is not working. When time is reached, the configured output is not switched on.

The firmware gets the UTC adjustment wrong, there's a thread somewhere that covers this.  So you need to figure out what time the board thinks it currently is and then adjust the time setting in the IFTTT rule to match that rather than the actual time.

Yes, I found the thread. I adjusted the UTC settings so that the time on index page is in sync with the local time on my PC. But it did not work. ?‍♂️