KBOX COMMUNICATION WITH KC868-H32B

[ahmedk4444@yahoo.com]

This is very excellent new swaping between 2 apps one for internal network and one for 4G was not practical.
Then i don't need separate other version of KBox just change setup to MQTT am i right?

[ahmedk4444@yahoo.com]

The terminal block of the controller is very small and connecting 1 or 2 mm2 wires strands not tight well.
What is the recommended wires connectered to output terminal blo ks 1 or 2 mm2 and solid or strands in order to not have any loose connection?

[admin]

This is very excellent new swaping between 2 apps one for internal network and one for 4G was not practical.
Then i don't need separate other version of KBox just change setup to MQTT am i right?

Yes, you are right. the newest BOX support "TCP Server" and "MQTT" at the same phone app.

[admin]

The terminal block of the controller is very small and connecting 1 or 2 mm2 wires strands not tight well.
What is the recommended wires connectered to output terminal blo ks 1 or 2 mm2 and solid or strands in order to not have any loose connection?

both can use by solid or strands, just need chose correct diameter of wire.

[ahmedk4444@yahoo.com]

Thank you so much for Kincony support to install the new version  2.0 of Kbox that can work on MQTT
Some comment and questions:-
1. The Kbox version of android is not exist only the previous version for internal network only?
2. The sene is not work neither for original mobile nor the other family mobile.?
3. Sometimes kbox is not responsive quickly and hanging (stop function -no response or delay?
4. Changing the channel name on the original mobile is not updated to other mobile you still can control from different mobiled that copied the QR code of the device but can't see all update done on the channels name including the scene created?

[ahmedk4444@yahoo.com]

Continue my previous post for limited no. of words:-
5. The device ico for channel symbol as a variety is too low and need to be rich of symbole then can easy identify what you need to control easy without reading long channel description name?
6. Which pc software i can use to control and program the controllers from PC/laptop?

Pls see attachements for orginal mobile and other family member copied.

[admin]

Thank you so much for Kincony support to install the new version  2.0 of Kbox that can work on MQTT
Some comment and questions:-
1. The Kbox version of android is not exist only the previous version for internal network only?
2. The sene is not work neither for original mobile nor the other family mobile.?
3. Sometimes kbox is not responsive quickly and hanging (stop function -no response or delay?
4. Changing the channel name on the original mobile is not updated to other mobile you still can control from different mobiled that copied the QR code of the device but can't see all update done on the channels name including the scene created?

1. old version only work in local network, begin 2022 new version support both internal or internet network. just change different work protocol for "TCP" or "MQTT".  "TCP" use for internal network, "MQTT" use for internet.
2. scene mode can work on every version.
3. you can install the LOG version, so that if have problem, can send LOG file feedback to us, help you to slove problem.  see details: https://www.kincony.com/forum/showthread.php?tid=1699
4. every mobile config file only save in local mobile phone. you can use "restore" function restore config data from original phone, here have video tour: https://youtu.be/NDMd7mag3HI
5. in furture maybe will add ico.
6. https://www.kincony.com/download/KBOX-Pad.zip this for windows PC or windows tablet  all software download from:https://www.kincony.com/document

[ahmed]

       
        Scene not working in both original mobile and other shared mobile ( see attached log file as you suggested in item 3).
4. followed the video and used restore configure data from original phone not update the new name channels in the original phone ( see attached log file as you suggested in item 3)
6. Kbox-pad installed not able to communicate with the controller no input configuration to select and communicate with the desired controller using ip and port pls see attached photo

[admin]

1. how to create scene mode, can you take a video send to us?
2. after you restore, close the app and re-open again, whether see new device?
3. your photo pc software is old version for COL, not COLB's new software, if you are using KC868-H32B , you should use https://www.kincony.com/download/KBOX-Pad.zip

[ahmed]

This is the one that i used KBox-Pad but failed to connect see bottom of the attached photo