Tasmota A6 Templates/Mapping

[jirasekuo]

Yes, GPIO32 and GPIO33.

You can see:
https://www.itex24.cz/MainMenu.jpg
https://www.itex24.cz/Config.jpg

[admin]

Tasmota Settings~
In the Configuration -> Configure Module page assign:

GPIOx to DS18x20

After a reboot the driver will display Temperature.

Do you have reboot?

here is details of tasmota work with DS18B20: https://tasmota.github.io/docs/DS18x20/#wiring

[jirasekuo]

Everything is OK. My fault. Sensor must be connected :-), if it isn't, the temperature visualization isn't visible.
Thanks.

[admin]

ok, good.