The newest "KCS" 2023 firmware for KC868-A series board released

[admin]

“KCS” means “KinCony Super” , this is a new firmware developed by KinCony for KC868-A series products in 2023.

we have released firmware for KC868-A4, KC868-A6, KC868-A8, KC868-A8S, KC868-A16, KC868-E16S, KC868-A32, KC868-A64, KC868-A128, KC868-AK, KC868-AI.
We will continue to update firmware according to user feedback.

download at here: https://www.kincony.com/forum/forumdisplay.php?fid=40

[auricaionut466@gmail.com]

want to tell you that I have tested the new firmware for
KC868-A4 board and I tested 4-20 ma sensors and noticed that it doesn't want to activate a relay on the output if I don't have the tuiya application open
how can i fix this

[admin]

now if have tuya licence can set INPUT trigger OUTPUT by tuya mobile phone application.
if you without tuya licence, maybe in furture, we will update KCS firmware for local logical control function for analog input.

[leliodm]

“KCS” means “KinCony Super” , this is a new firmware developed by KinCony for KC868-A series products in 2023.

we have released firmware for KC868-A4, KC868-A6, KC868-A8, KC868-A8S, KC868-A16, KC868-E16S, KC868-A32, KC868-A64, KC868-A128, KC868-AK, KC868-AI.
We will continue to update firmware according to user feedback.

download at here: https://www.kincony.com/forum/forumdisplay.php?fid=40

Hi. 
I have a A4 which I previously loaded with Tasmota. I am now trying to install the KCS firmware. I could not make it work. the flash terminates in less than a second after I reset the A4 and push the S2 switch button. The result is attached. How can I do it? thanks

[admin]

because you have not click the "checkbox". see the photo.
   
by the way, the newest firmware is v1.0.15, suggest download the newest, here is download link:
https://www.kincony.com/forum/showthread.php?tid=2542

[leliodm]

because you have not click the "checkbox". see the photo.

by the way, the newest firmware is v1.0.15, suggest download the newest, here is download link:
https://www.kincony.com/forum/showthread.php?tid=2542

Thank you! it works

[admin]

ok.