Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KC868-AIO configure yaml for ESPhome
#1
   

.txt   KC868-AIO-ESPHome.txt (Size: 20.73 KB / Downloads: 1,264)
Reply
#2
The ESPHome code shows Dallas on pin5.

dallas:
- pin: 5
update_interval: 60s

# Example configuration entry
sensor:

- platform: dallas
address: 0xec0921405caae128
name: "aio--ds18b20"


Where does it connect on the board?
Reply
#3
see photo. there are two GPIOs use for DS18B20.
   
Reply
#4
Thank you.
Reply
#5
you are welcome
Reply
#6
Hello.  I need 62 inputs for my home automation (push buttons).  I can use the 56 digital inputs for that but I need 6 more, is it possible to use the analog input as digital input?

Thank you
Reply
#7
sure, no problem, just connect with a voltage to analog input, such as 5v or 3.3v, because analog input range is dc 0-5v.
Reply
#8
(04-06-2023, 01:01 AM)admin Wrote: sure, no problem, just connect with a voltage to analog input, such as 5v or 3.3v, because analog input range is dc 0-5v.

Thanks a lot
Reply
#9
you are welcome
Reply
#10
how can I use the SIM module with ESPhome?
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)