how instal firmware.

[befree8]

Please help, I installed tasmota and wants to return for esphome, how to return to the original software because now by home assistant can not add the device.  ( info with home assistans: "Unable to connect to the ESP. Make sure your YAML file contains the 'api:' line.)

[admin]

that means your config yaml file need add 'api:' line. it already told you.

[befree8]

that means your config yaml file need add 'api:' line.  it already told you.

I don't know what it means, (I'm just starting to play with home automation) can you just share the a16s firmware ?  I couldn't find it anywhere on the forum

[admin]

home assistant for A16S config yaml: https://www.kincony.com/forum/showthread.php?tid=2789

[befree8]

Okay I was able to install. But the relays don't work, why? (16 digital inputs)

   
   

[admin]

do you means: relay work well , only INPUT not work?

[befree8]

the 'input' does not activate the relay. Switch work well. You see the pictures
   
   
   

[admin]

if you want INPUT trigger OUTPUT, need config in yaml file. such as:

binary_sensor:
- platform: gpio
name: "input1"
on_press:
then:
- switch.toggle: light1
pin:
pcf8574: pcf8574_hub_in_1
number: 0
mode: INPUT
inverted: true

[befree8]

Thank you for your help. I changed the code using the on_multi_cilck command, (I read another topic on the forum)

I have another question, Is it possible to control the device via a smartphone but outside the home? I set up Homekit on the iPhone but it only works on the home network.

Do you already know when there will be integration with the tuya application. And new software?

[admin]

new "KCS" v2 will support A16S use by Tuya app, under developing now. this month will be finished.