A24 configure yaml for ESPhome

[Yocee]

Hi!

Please post working esphome config, for modbus communication.
I has multiple devices ( ESP32 with ttl converter automatic flow controll, Lillygo can with flow pin controll, Elfin ew11 modbus gateway), and the communication beetween heatpump and Home assistant is working, but with KC868-24 is not.

I use this config:
https://pastebin.com/K71z8P50

I think, i need SLAVE. I want to read and write heatpumps, fancoils, thermostat registers.