H32B Pro via Ethernet - no default values in web interface

[Floeckchen]

if you are using KC868-H32B Pro, you have downloaded wrong firmware file.
this is the newest firmware v1.19 for KC868-H32B Pro: https://www.kincony.com/forum/showthread.php?tid=3234  just download ,unzip the file, download BIN file to H32B Pro controller.

Thank you for the quick answer. I have downloaded the correct firmware now.

I can connect to the H32B Pro via the Net Remote IAP. After selecting the firmware file and clicking download nothing happens:

   

In what mode should the H32B Pro be for a firmware update? TCP Server?


On the integration into Home Assistant:

since adding the MQTT section in the configuration.yaml has been depreciated, it there another way to integrate the H32B Pro into Home Assistant easily?

Thank you.