01-14-2024, 06:41 PM
(This post was last modified: 01-15-2024, 12:41 AM by matthewdresden.)
(01-13-2024, 10:57 PM)matthewdresden Wrote: ESP32 IoT Board Issue with ESPHome Firmware Installation
Solution:
The issue I had when flashing the firmware from command line using the esphome python pip was this: it produces 2 firmware files, `firmware.bin and firmware-factory.bin`. Kinkony was able to demonstrate flashing it from esphome which was deployed in Home Assistant OS. This gave me the oppurtunity to compare the difference between what was happening from Home Assistant (esphome) and esphome from command line.
The factory firmware file is what worked.
From here I also found in order to be able to upload flash updates without having home assistant OS plugged into the board with USB, I needed to add the key to the yaml file called `ota:`
Matthew Dresden
Global DevSecOps Leader at Launch by NTT Data, INC
IOT and Alternative Power Enthusiasts
Global DevSecOps Leader at Launch by NTT Data, INC
IOT and Alternative Power Enthusiasts