01-22-2024, 04:01 PM
Hi
I emailed hificat@163.com and asked the following question.
I am locking for a control board that has the following
ESP32 WiFi which can be connected to Home Assistant
Has 6 relay outputs which can be controlled via Home Assistant
Has 6 inputs who state changes are passed onto Home Assistant
Has 2 inputs which I can connect Wiegand RFID/Keypads so when a code is enter or a tag is read it is passed onto Home Assistant
Do yo have such a board as I am looking for 2 such boards ?
The response I got was
KC868-A6 suitable for you.
here is details: https://www.kincony.com/esp32-6-channel-...68-a6.html
My response was
Thanks for the info.
but that on has one serial interface on the board or can I use that for one Wiegand keypad and the 9pin D for the other Wiegand keypad as I need to connect 2 to each board
then I got this response.
see this photo:
https://www.kincony.com/images/KC868-A6/KC868-A6-1_05.jpg
there are IO1 and IO2 use for Wiegand keypad.
Which I understand but I then asked this question
So I connect the first keypad to IO1 & IO2 and connect the second keypad to the serial port outlined in the diagram.
Or can I only connect one keypad ?
The then told the told me to ask my question on here. So here I am
So my main question is how I connect 2 Wiegand Keypads to KC868-A6
Thanks
Eddie
I emailed hificat@163.com and asked the following question.
I am locking for a control board that has the following
ESP32 WiFi which can be connected to Home Assistant
Has 6 relay outputs which can be controlled via Home Assistant
Has 6 inputs who state changes are passed onto Home Assistant
Has 2 inputs which I can connect Wiegand RFID/Keypads so when a code is enter or a tag is read it is passed onto Home Assistant
Do yo have such a board as I am looking for 2 such boards ?
The response I got was
KC868-A6 suitable for you.
here is details: https://www.kincony.com/esp32-6-channel-...68-a6.html
My response was
Thanks for the info.
but that on has one serial interface on the board or can I use that for one Wiegand keypad and the 9pin D for the other Wiegand keypad as I need to connect 2 to each board
then I got this response.
see this photo:
https://www.kincony.com/images/KC868-A6/KC868-A6-1_05.jpg
there are IO1 and IO2 use for Wiegand keypad.
Which I understand but I then asked this question
So I connect the first keypad to IO1 & IO2 and connect the second keypad to the serial port outlined in the diagram.
Or can I only connect one keypad ?
The then told the told me to ask my question on here. So here I am
So my main question is how I connect 2 Wiegand Keypads to KC868-A6
Thanks
Eddie