The big problem is NOT that the time is out of sync for some seconds or minutes.
The problem is that the change of UTC does NOT refelct the numbers changed.
I do have tested the NTP server with pool.ntp.org as well as with ntp.metas.ch as used on several other projects without any problems.
To proof the fault.
Zhejiang is in nthe timezone UTC +8. So at the time of this writing, this should show as 18:02.
But If I change the "time zone" in the System on the KC868_AG it is still 7 hours to. low.
BUT ALSO!!!
If I let the index page open for a certan time, the shwon clock gets slowly out of sync with dropped seconds. Only after a refersh of the webpage, the time is in sync again...
I'm missing the following possibilities which other products (even Open Source) do have as a standard.
- Hide passwords per DEFAULT!!! (only show on user interaction)
- Firmware Update over network (OTA), internal HTTP Server. Right now after every firmware update I lose all settings and configs.
- Ability to upload certificate for a secure HTTPS management connection
- Firmware Update without loss of all settings!!!! VERY IMPORTANT AND ANNOYING
- Download-/Upload all device settings, use HASH for password(s)
- Download/Upload IR/RF Codes to be able to share them with others and therefore to build a database of those codes
The problem is that the change of UTC does NOT refelct the numbers changed.
I do have tested the NTP server with pool.ntp.org as well as with ntp.metas.ch as used on several other projects without any problems.
To proof the fault.
Zhejiang is in nthe timezone UTC +8. So at the time of this writing, this should show as 18:02.
But If I change the "time zone" in the System on the KC868_AG it is still 7 hours to. low.
BUT ALSO!!!
If I let the index page open for a certan time, the shwon clock gets slowly out of sync with dropped seconds. Only after a refersh of the webpage, the time is in sync again...
(12-07-2023, 01:31 AM)admin Wrote: Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.KC868-AG Pro:
How to download and use, online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
v2.2.2 improment:
1. fixed bug can't show negative temperature with DS18B20
I'm missing the following possibilities which other products (even Open Source) do have as a standard.
- Hide passwords per DEFAULT!!! (only show on user interaction)
- Firmware Update over network (OTA), internal HTTP Server. Right now after every firmware update I lose all settings and configs.
- Ability to upload certificate for a secure HTTPS management connection
- Firmware Update without loss of all settings!!!! VERY IMPORTANT AND ANNOYING
- Download-/Upload all device settings, use HASH for password(s)
- Download/Upload IR/RF Codes to be able to share them with others and therefore to build a database of those codes