I have recently purchased an KC868-A32 and KC868-AG Pro in order to have DigitalInputs + Tuya + HomeAsistant + RF controll all at the same time on 32 relays.
I have uploaded via the flash_download_tool_3.9.2 tool the respective .bin files to both devices and then managed to access their IP and connect them to my WiFi.
On the KC868-A32 I have managed via the IFTTT part to configure the relays to work via the digital input pins.
On the KC868-AG Pro I have managed to learn 32 RF buttons and also manged to connect to the tuya App.
EDIT: I managed to control the relays in the local network via KBOX App
I have a couple problems/ don't know how to do:
1. how can I see the leaned RF buttons on the KC868-AG in the tuya app ? (or I need to "learn" them again from the tuya app?)
2. how can I control the KC868-A32 relays via RF signals received by the KC868-AG ? (I have enabled on the A32 the TCP-Server, but I did not manage to make the 2 devices work with eachother)
3. what do I need to do in order to see the 32 relays from the tuya app, so I can control them from the app itself ?
4. in order to make the HomeAsistant part to work I assume I need to deploy the HomeAsistant to a raspbery pi and then ? Do you have any tutorials on setting up the control of the relays from the HomeAsistant, if yes, please share me the links
UPDATE regarding question 2, after a couple of hours of debug of the C# MulitiBoardCtrlV1 code:
1. from Postman I can make API GET calls to the KC868-A32 IP : PORT and setting the body content to "RELAY-SET-255,1,0" or "RELAY-SET-255,1,1" and it works perfect on relay 1 without any noticeable delay between the API call and the relay actuating
2. from the IFTTT of the KC868-AG I made an action IF RF1 THEN CUSTOME PROTOCOL1 , where CUSTOME PROTOCOL1 is HTTP GET with message "RELAY-SET-255,1,0" and the URL and port of the A32 , this WORKS but with a HUGE delay beteween the RF remote button press and the relay actuating ~12seconds (while the direct api call from Postman working instant) , any ideas why ? or what I did wrong ?
Thank you in advance,
Best regards,
Darius M.
I have uploaded via the flash_download_tool_3.9.2 tool the respective .bin files to both devices and then managed to access their IP and connect them to my WiFi.
On the KC868-A32 I have managed via the IFTTT part to configure the relays to work via the digital input pins.
On the KC868-AG Pro I have managed to learn 32 RF buttons and also manged to connect to the tuya App.
EDIT: I managed to control the relays in the local network via KBOX App
I have a couple problems/ don't know how to do:
1. how can I see the leaned RF buttons on the KC868-AG in the tuya app ? (or I need to "learn" them again from the tuya app?)
2. how can I control the KC868-A32 relays via RF signals received by the KC868-AG ? (I have enabled on the A32 the TCP-Server, but I did not manage to make the 2 devices work with eachother)
3. what do I need to do in order to see the 32 relays from the tuya app, so I can control them from the app itself ?
4. in order to make the HomeAsistant part to work I assume I need to deploy the HomeAsistant to a raspbery pi and then ? Do you have any tutorials on setting up the control of the relays from the HomeAsistant, if yes, please share me the links
UPDATE regarding question 2, after a couple of hours of debug of the C# MulitiBoardCtrlV1 code:
1. from Postman I can make API GET calls to the KC868-A32 IP : PORT and setting the body content to "RELAY-SET-255,1,0" or "RELAY-SET-255,1,1" and it works perfect on relay 1 without any noticeable delay between the API call and the relay actuating
2. from the IFTTT of the KC868-AG I made an action IF RF1 THEN CUSTOME PROTOCOL1 , where CUSTOME PROTOCOL1 is HTTP GET with message "RELAY-SET-255,1,0" and the URL and port of the A32 , this WORKS but with a HUGE delay beteween the RF remote button press and the relay actuating ~12seconds (while the direct api call from Postman working instant) , any ideas why ? or what I did wrong ?
Thank you in advance,
Best regards,
Darius M.