03-02-2024, 02:18 AM
1. how can I see the leaned RF buttons on the KC868-AG in the tuya app ? (or I need to "learn" them again from the tuya app?)
Yes, if you want to send "learned" signal as a BUTTON, you need learn from tuya app again. because KCS and Tuya are two different system.
2. how can I control the KC868-A32 relays via RF signals received by the KC868-AG ? (I have enabled on the A32 the TCP-Server, but I did not manage to make the 2 devices work with eachother)
here is video tour about it: https://youtu.be/Q4gCo-Kf8bM
3. what do I need to do in order to see the 32 relays from the tuya app, so I can control them from the app itself ?
if you want to use A32 work with Tuya app, you need to buy tuya license for your A32, 5usd/ one board. Then you can fill in KCS tuya config webpage.
here is details: https://www.kincony.com/forum/showthread.php?tid=2544
4. in order to make the HomeAsistant part to work I assume I need to deploy the HomeAsistant to a raspbery pi and then ?
it's OK, you can use a raspbery pi, or KinCony KC868-Server / Server-Mini, they are all raspbery pi controller.
A32 have two different way integrate to home assistant:
a. add to home assisant by ESPHome.
b. add to home assistant by KCS firmware via MQTT.
here is solution b config yaml demo: https://www.kincony.com/forum/showthread.php?tid=3274
it's A8S board add to HA by MQTT, A32 is same.
5. if you want to use IF RF1 control relay output, suggest enable A32 TCP Server protocol, not use by HTTP. you can see our video tour said the link above.
Yes, if you want to send "learned" signal as a BUTTON, you need learn from tuya app again. because KCS and Tuya are two different system.
2. how can I control the KC868-A32 relays via RF signals received by the KC868-AG ? (I have enabled on the A32 the TCP-Server, but I did not manage to make the 2 devices work with eachother)
here is video tour about it: https://youtu.be/Q4gCo-Kf8bM
3. what do I need to do in order to see the 32 relays from the tuya app, so I can control them from the app itself ?
if you want to use A32 work with Tuya app, you need to buy tuya license for your A32, 5usd/ one board. Then you can fill in KCS tuya config webpage.
here is details: https://www.kincony.com/forum/showthread.php?tid=2544
4. in order to make the HomeAsistant part to work I assume I need to deploy the HomeAsistant to a raspbery pi and then ?
it's OK, you can use a raspbery pi, or KinCony KC868-Server / Server-Mini, they are all raspbery pi controller.
A32 have two different way integrate to home assistant:
a. add to home assisant by ESPHome.
b. add to home assistant by KCS firmware via MQTT.
here is solution b config yaml demo: https://www.kincony.com/forum/showthread.php?tid=3274
it's A8S board add to HA by MQTT, A32 is same.
5. if you want to use IF RF1 control relay output, suggest enable A32 TCP Server protocol, not use by HTTP. you can see our video tour said the link above.