Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
433MHz remote_receiver
#3
(06-19-2024, 10:32 PM)admin Wrote: you can test with this yaml whether work well.

Your YAML worked, thank you! I've tried to pinpoint what caused the error. It seems that using both remote_receiver and RGB light element does not work well together. I can use remote_receiver or WS2812B.

This is current working configuration:
Code:
esphome:
  name: kc868-a8s
  platform: ESP32
  board: esp32dev

# Enable logging
logger:

web_server:
  port: 80

ota:

# Enable Home Assistant API
api:

remote_receiver:
  pin: 16
  dump:
    - raw
  tolerance: 50%
  filter: 250us
  idle: 2ms
  buffer_size: 2kb

# Example configuration entry for ESP32
i2c:
  sda: 4
  scl: 5
  scan: true
  id: bus_a

# Example configuration entry
ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0

# Example configuration entry
pcf8574:
  - id: 'pcf8574_hub_out_1' # for output channel 1-8
    address: 0x24

  - id: 'pcf8574_hub_in_1' # for input channel 9-16
    address: 0x22

# Individual outputs
switch:
  - platform: gpio
    name: "relay1"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 0
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay2"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 1
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay3"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 2
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay4"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 3
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay5"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 4
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay6"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 5
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay7"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 6
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "relay8"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 7
      mode: OUTPUT
      inverted: true

binary_sensor:
  - platform: gpio
    name: "input1"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 0
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input2"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 1
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input3"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 2
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input4"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 3
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input5"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 4
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input6"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 5
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input7"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 6
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input8"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 7
      mode: INPUT
      inverted: true


output:
  - platform: ledc
    pin: GPIO2
    id: buzzer_output

rtttl:
  output: buzzer_output


#light:
#  - platform: fastled_clockless
#    chipset: WS2812B
#    pin: GPIO12
#    num_leds: 1
#    rgb_order: GRB
#    name: "rgb_led"
#    id: rgb_led
#    default_transition_length: 0s
#    restore_mode: ALWAYS_OFF
Reply


Messages In This Thread
433MHz remote_receiver - by deltabridge - 06-19-2024, 09:54 PM
RE: 433MHz remote_receiver - by admin - 06-19-2024, 10:32 PM
RE: 433MHz remote_receiver - by deltabridge - 06-20-2024, 04:11 PM
RE: 433MHz remote_receiver - by admin - 06-20-2024, 10:34 PM

Forum Jump:


Users browsing this thread: