Dallas DS18b20 sensor is no longer found after the last ESPHOME update - KC868-A4

[csacomani]

Add the following to your esphome yaml for the device:

external_components:
  - source:
      type: git
      url: https://github.com/ssieb/esphome
      ref: onewire
    components: [ gpio ]
    refresh: 1min

Then your dallas sensors on gpio13 & 14 will be recognized. I have attached a working KC868-AM YAML file with nine ds18b20 sensors and they all work. Just change the address to yours.

Thanks for sharing

With this change in the code, my sensor started working again.