There is any diagram connection ? Thanks a lot. Any special configuration or the m30 just detect the modbus and receive the consume and present as an entity?
I see a config in the yaml
uart:
id: modbus_uart
rx_pin: 32
tx_pin: 33
baud_rate: 115200
stop_bits: 1
data_bits: 8
parity: NONE
I see a config in the yaml
uart:
id: modbus_uart
rx_pin: 32
tx_pin: 33
baud_rate: 115200
stop_bits: 1
data_bits: 8
parity: NONE