[Arduino IDE demo source code for KC868-A16]--#11-KC868-A16_Ethernet_Web_server_code

[tonbor]

modify config file for ethernet gpio pin define.

This are the defines, should not cause this compiler error:
// I²C-address of Ethernet PHY (0 or 1 for LAN8720, 31 for TLK110)
#ifndef ETH_PHY_ADDR
  #define ETH_PHY_ADDR        1
#endif

// Type of the Ethernet PHY (LAN8720 or TLK110)
//typedef enum { ETH_PHY_LAN8720, ETH_PHY_TLK110, ETH_PHY_RTL8201, ETH_PHY_DP83848, ETH_PHY_DM9051, ETH_PHY_KSZ8081, ETH_PHY_MAX } eth_phy_type_t;

#ifndef ETH_PHY_TYPE
  #define ETH_PHY_TYPE    ETH_PHY_LAN8720
#endif

// Pin# of the enable signal for the external crystal oscillator (-1 to disable for internal APLL source)
#ifndef ETH_PHY_POWER
  #define ETH_PHY_POWER  16
#endif

// Pin# of the I²C clock signal for the Ethernet PHY
#ifndef ETH_PHY_MDC
  #define ETH_PHY_MDC    23
#endif

// Pin# of the I²C IO signal for the Ethernet PHY
#ifndef ETH_PHY_MDIO
  #define ETH_PHY_MDIO    18
#endif