Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a16 as basis for a security system
#2
1. motion sensor have 4 wires, two are dc12v power supply, you can use by your KC868-A16's power supply. another 2 wires just connect to digital input port of KC868-A16 and GND..
2. about siren, just chose to buy DC12v version siren, so that you can let KC868-A16 mosfet output drive siren directly. Because of the mosfet we designed by MAX 10A, it's enough for siren to use, you not need to use a extend power supply for siren.
3. the home assistant server MUST connect with your router, just if you don't want use KC868-A16 by ethernet cable. you can use RS485 cable conenct to your home assistant server's RS485 port. Such as if you use KinCony Server-Mini or Server16 Pi controller, there is a RS485 port, it can drive relay board by RS485 cable. Just integrate KC868-A16 to home assistant by modbus component using ESPHome. We have YouTube video tour for that.
Reply


Messages In This Thread
a16 as basis for a security system - by lcrisp - 09-16-2024, 12:50 AM
RE: a16 as basis for a security system - by admin - 09-16-2024, 01:13 AM
RE: a16 as basis for a security system - by admin - 09-16-2024, 05:12 AM
RE: a16 as basis for a security system - by admin - 09-18-2024, 11:57 PM
RE: a16 as basis for a security system - by admin - 09-18-2024, 11:58 PM
RE: a16 as basis for a security system - by admin - 09-23-2024, 02:12 PM
RE: a16 as basis for a security system - by admin - 09-24-2024, 12:43 PM
RE: a16 as basis for a security system - by admin - 09-25-2024, 11:05 PM

Forum Jump:


Users browsing this thread:
1 Guest(s)