11-28-2024, 11:54 AM
Code:
esphome:
name: f24
friendly_name: f24
platformio_options:
board_build.extra_flags:
# WIFI_CONTROL_SELF_MODE = 0
# WIFI_CONTROL_SELF_MODE = 1
- "-DWIFI_CONTROL_SELF_MODE=1"
esp32:
board: esp32-s3-devkitc-1
framework:
type: arduino
external_components:
- source:
type: git
url: https://github.com/hzkincony/esphome-tuya-wifi-mcu
ref: v1.1.0
# Enable logging
# hardware_uart: USB_SERIAL_JTAG
# Enable Home Assistant API
api:
encryption:
key: "WeVOuL5oNhjXcfzXtTirlOwvtWvCD5yqIxd3oV4es1k="
ethernet:
type: W5500
clk_pin: GPIO42
mosi_pin: GPIO43
miso_pin: GPIO44
cs_pin: GPIO41
interrupt_pin: GPIO2
reset_pin: GPIO1
i2c:
- id: bus_a
sda: 8
scl: 18
scan: true
frequency: 400kHz
pcf8574:
- id: 'pcf8574_hub_out_1' # for output channel 9-24
i2c_id: bus_a
address: 0x25
pcf8575: true
- id: 'pcf8574_hub_in_1' # for digital input channel 1-16
i2c_id: bus_a
address: 0x24
pcf8575: true
- id: 'pcf8574_hub_out_in_2' # for output channel 1-8 + (input 17-24)
i2c_id: bus_a
address: 0x26
pcf8575: true
uart:
- id: uart_1 #RS485
baud_rate: 9600
debug:
direction: BOTH
dummy_receiver: true
after:
timeout: 10ms
tx_pin: 16
rx_pin: 17
- id: tuya_mcu_uart
tx_pin: GPIO39
rx_pin: GPIO38
baud_rate: 9600
tuya_wifi_mcu:
# tuya mcu product id
product_id: cchos3g1j2ucfbyd
uart_id: tuya_mcu_uart
wifi_reset_pin: 28
wifi_led_pin: 16
switch:
- platform: uart
uart_id: uart_1
name: "RS485 Button"
data: [0x11, 0x22, 0x33, 0x44, 0x55]
- platform: gpio
name: "f24-output01"
id: "f24_output01"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 12
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output1-tuya
dp_id: 1
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output01"
- platform: gpio
name: "f24-output02"
id: "f24_output02"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 13
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output2-tuya
dp_id: 2
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output02"
- platform: gpio
name: "f24-output03"
id: "f24_output03"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 14
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output3-tuya
dp_id: 3
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output03"
- platform: gpio
name: "f24-output04"
id: "f24_output04"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 15
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output4-tuya
dp_id: 4
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output04"
- platform: gpio
name: "f24-output05"
id: "f24_output05"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 8
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output5-tuya
dp_id: 5
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output05"
- platform: gpio
name: "f24-output06"
id: "f24_output06"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 9
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output6-tuya
dp_id: 6
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output06"
- platform: gpio
name: "f24-output07"
id: "f24_output07"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 10
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output7-tuya
dp_id: 101
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output07"
- platform: gpio
name: "f24-output08"
id: "f24_output08"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 11
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output8-tuya
dp_id: 102
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output08"
- platform: gpio
name: "f24-output09"
id: "f24_output09"
pin:
pcf8574: pcf8574_hub_out_1
number: 0
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output9-tuya
dp_id: 103
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output09"
- platform: gpio
name: "f24-output10"
id: "f24_output10"
pin:
pcf8574: pcf8574_hub_out_1
number: 1
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output10-tuya
dp_id: 104
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output10"
- platform: gpio
name: "f24-output11"
id: "f24_output11"
pin:
pcf8574: pcf8574_hub_out_1
number: 2
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output11-tuya
dp_id: 105
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output11"
- platform: gpio
name: "f24-output12"
id: "f24_output12"
pin:
pcf8574: pcf8574_hub_out_1
number: 3
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output12-tuya
dp_id: 106
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output12"
- platform: gpio
name: "f24-output13"
id: "f24_output13"
pin:
pcf8574: pcf8574_hub_out_1
number: 4
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output13-tuya
dp_id: 107
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output13"
- platform: gpio
name: "f24-output14"
id: "f24_output14"
pin:
pcf8574: pcf8574_hub_out_1
number: 5
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output14-tuya
dp_id: 108
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output14"
- platform: gpio
name: "f24-output15"
id: "f24_output15"
pin:
pcf8574: pcf8574_hub_out_1
number: 6
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output15-tuya
dp_id: 109
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output15"
- platform: gpio
name: "f24-output16"
id: "f24_output16"
pin:
pcf8574: pcf8574_hub_out_1
number: 7
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output16-tuya
dp_id: 110
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output16"
- platform: gpio
name: "f24-output17"
id: "f24_output17"
pin:
pcf8574: pcf8574_hub_out_1
number: 8
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output17-tuya
dp_id: 126
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output17"
- platform: gpio
name: "f24-output18"
id: "f24_output18"
pin:
pcf8574: pcf8574_hub_out_1
number: 9
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output18-tuya
dp_id: 129
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output18"
- platform: gpio
name: "f24-output19"
id: "f24_output19"
pin:
pcf8574: pcf8574_hub_out_1
number: 10
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output19-tuya
dp_id: 130
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output19"
- platform: gpio
name: "f24-output20"
id: "f24_output20"
pin:
pcf8574: pcf8574_hub_out_1
number: 11
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output20-tuya
dp_id: 131
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output20"
- platform: gpio
name: "f24-output21"
id: "f24_output21"
pin:
pcf8574: pcf8574_hub_out_1
number: 12
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output21-tuya
dp_id: 132
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output21"
- platform: gpio
name: "f24-output22"
id: "f24_output22"
pin:
pcf8574: pcf8574_hub_out_1
number: 13
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output22-tuya
dp_id: 133
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output22"
- platform: gpio
name: "f24-output23"
id: "f24_output23"
pin:
pcf8574: pcf8574_hub_out_1
number: 14
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output23-tuya
dp_id: 134
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output23"
- platform: gpio
name: "f24-output24"
id: "f24_output24"
pin:
pcf8574: pcf8574_hub_out_1
number: 15
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-output24-tuya
dp_id: 135
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "f24_output24"
binary_sensor:
- platform: gpio
name: "f24-input01"
id: "f24_input01"
pin:
pcf8574: pcf8574_hub_in_1
number: 0
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input1-tuya
dp_id: 111
bind_binary_sensor_id: f24_input01
internal: true
- platform: gpio
name: "f24-input02"
id: "f24_input02"
pin:
pcf8574: pcf8574_hub_in_1
number: 1
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input2-tuya
dp_id: 112
bind_binary_sensor_id: f24_input02
internal: true
- platform: gpio
name: "f24-input03"
id: "f24_input03"
pin:
pcf8574: pcf8574_hub_in_1
number: 2
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input3-tuya
dp_id: 113
bind_binary_sensor_id: f24_input03
internal: true
- platform: gpio
name: "f24-input04"
id: "f24_input04"
pin:
pcf8574: pcf8574_hub_in_1
number: 3
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input4-tuya
dp_id: 114
bind_binary_sensor_id: f24_input04
internal: true
- platform: gpio
name: "f24-input05"
id: "f24_input05"
pin:
pcf8574: pcf8574_hub_in_1
number: 4
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input5-tuya
dp_id: 115
bind_binary_sensor_id: f24_input05
internal: true
- platform: gpio
name: "f24-input06"
id: "f24_input06"
pin:
pcf8574: pcf8574_hub_in_1
number: 5
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input6-tuya
dp_id: 116
bind_binary_sensor_id: f24_input06
internal: true
- platform: gpio
name: "f24-input07"
id: "f24_input07"
pin:
pcf8574: pcf8574_hub_in_1
number: 6
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input7-tuya
dp_id: 117
bind_binary_sensor_id: f24_input07
internal: true
- platform: gpio
name: "f24-input08"
id: "f24_input08"
pin:
pcf8574: pcf8574_hub_in_1
number: 7
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input8-tuya
dp_id: 118
bind_binary_sensor_id: f24_input08
internal: true
- platform: gpio
name: "f24-input09"
id: "f24_input09"
pin:
pcf8574: pcf8574_hub_in_1
number: 8
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input9-tuya
dp_id: 119
bind_binary_sensor_id: f24_input09
internal: true
- platform: gpio
name: "f24-input10"
id: "f24_input10"
pin:
pcf8574: pcf8574_hub_in_1
number: 9
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input10-tuya
dp_id: 120
bind_binary_sensor_id: f24_input10
internal: true
- platform: gpio
name: "f24-input11"
id: "f24_input11"
pin:
pcf8574: pcf8574_hub_in_1
number: 10
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input11-tuya
dp_id: 121
bind_binary_sensor_id: f24_input11
internal: true
- platform: gpio
name: "f24-input12"
id: "f24_input12"
pin:
pcf8574: pcf8574_hub_in_1
number: 11
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input12-tuya
dp_id: 122
bind_binary_sensor_id: f24_input12
internal: true
- platform: gpio
name: "f24-input13"
id: "f24_input13"
pin:
pcf8574: pcf8574_hub_in_1
number: 12
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input13-tuya
dp_id: 123
bind_binary_sensor_id: f24_input13
internal: true
- platform: gpio
name: "f24-input14"
id: "f24_input14"
pin:
pcf8574: pcf8574_hub_in_1
number: 13
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input14-tuya
dp_id: 124
bind_binary_sensor_id: f24_input14
internal: true
- platform: gpio
name: "f24-input15"
id: "f24_input15"
pin:
pcf8574: pcf8574_hub_in_1
number: 14
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: f24-input15-tuya
dp_id: 125
bind_binary_sensor_id: f24_input15
internal: true
- platform: gpio
name: "f24-input16"
id: "f24_input16"
pin:
pcf8574: pcf8574_hub_in_1
number: 15
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input17"
id: "f24_input17"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 0
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input18"
id: "f24_input18"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 1
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input19"
id: "f24_input19"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 2
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input20"
id: "f24_input20"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 3
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input21"
id: "f24_input21"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 4
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input22"
id: "f24_input22"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 5
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input23"
id: "f24_input23"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 6
mode: INPUT
inverted: true
- platform: gpio
name: "f24-input24"
id: "f24_input24"
pin:
pcf8574: pcf8574_hub_out_in_2
number: 7
mode: INPUT
inverted: true
##pull-up resistance on PCB
- platform: gpio
name: "f24-W1-io48"
pin:
number: 48
inverted: true
- platform: gpio
name: "f24-W1-io47"
pin:
number: 47
inverted: true
- platform: gpio
name: "f24-W1-io21"
pin:
number: 21
inverted: true
- platform: gpio
name: "f24-W1-io15"
pin:
number: 15
inverted: true
## without resistance on PCB
- platform: gpio
name: "f24-W1-io13"
pin:
number: 13
inverted: false
- platform: gpio
name: "f24-W1-io14"
pin:
number: 14
inverted: false
- platform: gpio
name: "f24-433M"
pin:
number: 40
inverted: false
sensor:
- platform: adc
pin: 5
name: "f24 A1 Voltage"
update_interval: 5s
attenuation: 11db
filters:
- lambda:
if (x >= 3.11) {
return x * 1.60256;
} else if (x <= 0.15) {
return 0;
} else {
return x * 1.51;
}
- platform: adc
pin: 7
name: "f24 A2 Voltage"
update_interval: 5s
attenuation: 11db
filters:
# - multiply: 1.51515
- lambda:
if (x >= 3.11) {
return x * 1.60256;
} else if (x <= 0.15) {
return 0;
} else {
return x * 1.51;
}
- platform: adc
pin: 6
name: "f24 A3 Current"
update_interval: 5s
unit_of_measurement: mA
attenuation: 11db
filters:
- multiply: 6.66666666
- platform: adc
pin: 4
name: "f24 A4 Current"
update_interval: 5s
unit_of_measurement: mA
attenuation: 11db
filters:
- multiply: 6.66666666
web_server:
port: 80
font:
- file: "gfonts://Roboto"
id: roboto
size: 20
display:
- platform: ssd1306_i2c
i2c_id: bus_a
model: "SSD1306 128x64"
address: 0x3C
lambda: |-
it.printf(0, 0, id(roboto), "KinCony F24");
F24-HA.txt (Size: 18.55 KB / Downloads: 21)