12-04-2024, 05:26 PM
Good morning all,
I have just received brand new K868-A16 Rev:1.6 and connected to routeur
scan ip give address at 192.168.1.200. with mac: ec:c9:ff:b5:f3:6f
I ping this address:
ping 192.168.1.200
PING 192.168.1.200 (192.168.1.200): 56 data bytes
64 bytes from 192.168.1.200: icmp_seq=0 ttl=255 time=6.079 ms
My problem : web ui 192.168.1.200:80 reply This site is inaccessible
192.168.1.200 does not allow connection.
I have scan this address with UDP Scan from 0 to 65535 without nothing open
So I can't go any further. I have check on forum but without any success
How i can first connect to my new K868-A16 or the first time which is so far a nice useless brick
Your help will be appreciated
I have just received brand new K868-A16 Rev:1.6 and connected to routeur
scan ip give address at 192.168.1.200. with mac: ec:c9:ff:b5:f3:6f
I ping this address:
ping 192.168.1.200
PING 192.168.1.200 (192.168.1.200): 56 data bytes
64 bytes from 192.168.1.200: icmp_seq=0 ttl=255 time=6.079 ms
My problem : web ui 192.168.1.200:80 reply This site is inaccessible
192.168.1.200 does not allow connection.
I have scan this address with UDP Scan from 0 to 65535 without nothing open
So I can't go any further. I have check on forum but without any success
How i can first connect to my new K868-A16 or the first time which is so far a nice useless brick
Your help will be appreciated