KC868-AIO configure yaml for ESPhome

[xarouli5]

https://www.kincony.com/forum/showthread.php?tid=2736
you can delete the OTA command lines.

I commented the Dallas sensor, I changed the API & OTA lines with the ones provided by ESP32 & Home Assistant and I still get other errors:



INFO ESPHome 2024.11.2
INFO Reading configuration /config/esphome/aio.yaml...
Failed config

cd74hc4067: [source /config/esphome/aio.yaml:351]
  - id: cd74hc4067_1
    pin_s0:
      pcf8574: pcf8574_hub_out_in_3
      number: 8
      mode:
        output: True
        input: False
      inverted: True
    pin_s1:
      pcf8574: pcf8574_hub_out_in_3
      number: 9
      mode:
        output: True
        input: False
      inverted: True
    pin_s2:
      pcf8574: pcf8574_hub_out_in_3
      number: 10
      mode:
        output: True
        input: False
      inverted: True
    pin_s3:
      pcf8574: pcf8574_hub_out_in_3
      number: 11
      mode:
        output: True
        input: False
      inverted: True
    delay: 2ms
 
  'pin_s0' is a required option for [cd74hc4067].
  - [source /config/esphome/aio.yaml:385]
   
    [platform] is an invalid option for [cd74hc4067]. Please check the indentation.
    platform: adc
   
    [pin] is an invalid option for [cd74hc4067]. Did you mean [pin_s3], [pin_s2], [pin_s1]?
    pin: 36
    id: adc36
   
    [update_interval] is an invalid option for [cd74hc4067]. Please check the indentation.
    update_interval: never
   
    [attenuation] is an invalid option for [cd74hc4067]. Please check the indentation.
    attenuation: 11db
  - platform: adc
    name: aio--AI-17
required key not provided

required key not provided

required key not provided